Compression Testing Machine
Capacity: 200 Ton (2000 Kn)
Capacity: 100 Ton (1000 Kn)
Model: Digital
Type: Channel Based
Loading Unit: – The hydraulic jack of is fixed to the
base. The upper platen has got a self-aligning action
and is attached to a screw, which passes thru the cross-
head plate, and can be raised or lowered for initial
clearance adjustment. The lower platen rests on the
jackram and is positioned with the help of a centering
pin. Loading is accomplished by the upward movement
of the lower platen.
Pumping Unit :- The motorized pumping unit, which
is housed in an elegant console is of double plunger
type and is driven by a single phase 220/440 Volts 50
cycles electric motor. The pumping unit is a separate
unit connected to the jack by means of a Rubber Hose
Pipe. A junction box is suitable fixed to connect the
motor to the mains thru a push button starter.
Simplified design for ease of operation and maintenance.
Highly rigid frame.
Highly stability.
Safety provisions against over load.
Loads are calibrated in kN against certified proving rings.
Operator safety features like glass window are provided.
Self aligning platen with fast accessory change capability.
Peak Load recording.
Vickers hardness
Maximum diameter of Bottom Bearing Blocks dia 278mm.
Movable portion tilt 5.14 degrees.
Installation And Commission Procedure:
The concrete platform of is prepared with concrete having mixing ratio cement: sand: aggregate with water cement ratio and the fixing arrangements shall be done for compression testing machine such as bolting or welding rods are placed in concrete Then curing is done for 28 days.
Preparation Of Platform:
Placing of compression testing machine on concrete platform and fixing is done.–Initial setup is carried out such as cleanin connection and calibration
Reviews
There are no reviews yet.