View: 12 24 ALL
  • CTM – 1000 KN, Hand Operated

    Compression Testing Machine Specification : Compression Testing Equipment Manually (Hand) Operated fitted with single load gauge. The loads are measured on Bourdon tube type load gauges which are calibrated against certified proving rings. The load gauges are fitted with a maximum load pointer. Model SL-CC-006 SL-CC-007 Capacity (in KN) 1000 KN 1000 KN Pressure Gauge (In KN) 1000 KN 1000 KN Least Count (In KN) 5 KN 5 KN Pressure Gauge Diameter (mm) 150 200 Vertical Daylight (mm) 310 Adj 310 Horizontal Clearance(mm) 260 240 Platen Size (mm) 240 x 165 220 Ram Diameter (mm) 165 165 Ram Travel (mm) 50 50 Specimen Size (Can be Tested) Cube 100mm x 150mm 100mm x 150mm Cylindrical 100mm x 200mm 150mm x 300mm 100mm x 200mm 150mm x 300mm Brick 100 x 100 x225 mm


    1. GST & Transportation will be charged extra.
    2. Packing  Charges Extra
    3. No warranty
    4.  Ex- Mumbai
  • Cube Mould- Non ISI 150 X150 X 150mm

    Leading Supplier & manufacturer of Cube Mould. Which are made up of high quality of raw material.

  • Gubbi ISI Cube Mould – 15x15x15cm

    One of the leading manufacturer of ISI Cube Mould (150x 150x 150mm). Which is used for perfect strength of concrete. As per IS: 10086.

  • ISI Compression Testing Machine
    Usage/Application Concrete Testing
    Display Type Digital
    Capacity 2000 KN
    Brand Gubbi Industries
    Material Mild Steel
    Phase Single Phase
    Frequency 50 Hz
    Voltage 240 V
    Weight 20 kg
    Country of Origin Made in India


    • Compression testing machine is robust.
    • Loading Accuracy ± 1%
    • Simplified design for ease of operation and maintenance.
    • Highly rigid frame.
    • Highly stability.
    • Safety provisions against over load.
    • Loads are calibrated in kN against certified proving rings.
    • Operator safety features like glass window are provided.
    • Self aligning platen with fast accessory change capability.
    • Peak Load recording.
    • Vickers hardness
    • Maximum diameter of Bottom Bearing Blocks dia 278mm.
    • Movable portion tilt 5.14 degrees.

    Installation And Commission Procedure:

    • The concrete platform of is prepared with concrete having mixing ratio cement: sand: aggregate with water cement ratio and the fixing arrangements shall be done for compression testing machine such as bolting or welding rods are placed in concrete Then curing is done for 28 days.

    Preparation Of Platform:

    • Placing of compression testing machine on concrete platform and fixing is done.–Initial setup is carried out such as cleanin connection and calibration
    • Power to plug in Calibration to conduct.
    • CTM ready for testing.
  • Slump Cone Test Apparatus

    Slump cone apparatus is used to determining the consistency of freshly mixed concrete. Which is available @ very low price.