CTM – 1000 KN, Hand Operated₹34,000.00
Compression Testing Machine Specification : Compression Testing Equipment Manually (Hand) Operated fitted with single load gauge. The loads are measured on Bourdon tube type load gauges which are calibrated against certified proving rings. The load gauges are fitted with a maximum load pointer. Model SL-CC-006 SL-CC-007 Capacity (in KN) 1000 KN 1000 KN Pressure Gauge (In KN) 1000 KN 1000 KN Least Count (In KN) 5 KN 5 KN Pressure Gauge Diameter (mm) 150 200 Vertical Daylight (mm) 310 Adj 310 Horizontal Clearance(mm) 260 240 Platen Size (mm) 240 x 165 220 Ram Diameter (mm) 165 165 Ram Travel (mm) 50 50 Specimen Size (Can be Tested) Cube 100mm x 150mm 100mm x 150mm Cylindrical 100mm x 200mm 150mm x 300mm 100mm x 200mm 150mm x 300mm Brick 100 x 100 x225 mm
CTM – 3000 KN, Digital Opp₹192,000.00
As per IS ( 14858 ) 3000 KN. Cube Testing Machine (300 Ton) 232 Computer attachable with Software data with Computer set
Cube Testing Machine that is highly acclaimed for its proficiency. The prime use of this testing machine can be seen at the construction site where it is used to test the strength of the concrete. The structure of the machine is as compact as making it easy to use on immobile laboratories or mobile testing laboratories which frequently change site or location. It is particularly useful where constant and consistent electric power is not available.
CTM Digital Operated – 2000KN₹99,000.00
Compression Testing Machine
Capacity: 200 Ton (2000 Kn)
Capacity: 100 Ton (1000 Kn)
Type: Channel Based
Loading Unit: – The hydraulic jack of is fixed to the
base. The upper platen has got a self-aligning action
and is attached to a screw, which passes thru the cross-
head plate, and can be raised or lowered for initial
clearance adjustment. The lower platen rests on the
jackram and is positioned with the help of a centering
pin. Loading is accomplished by the upward movement
of the lower platen.
Pumping Unit :- The motorized pumping unit, which
is housed in an elegant console is of double plunger
type and is driven by a single phase 220/440 Volts 50
cycles electric motor. The pumping unit is a separate
unit connected to the jack by means of a Rubber Hose
Pipe. A junction box is suitable fixed to connect the
motor to the mains thru a push button starter.
Delivery Time 08-10 Days Packaging Details Extra As Actual
Cylindrical Mould 150 X 300 mm₹1,950.00
Concrete cylinder molds are used to create cylinder test specimens. The cylinder molds are constructed of plastic or steel. The plastic concrete cylinder molds are disposable, while the steel molds are reusable. The molds come in a variety of sizes including: 2″ x 4″, 3″ x 6″, 4″ x 8″, and 6″ x 12″.