-
Aggregate Crushing Value Apparatus₹4,100.00
The aggregate crushing value is determining of relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load.
-
Aggregate Impact Value Apparatus₹5,800.00
To determining aggregate impact value of soft coarse aggregates with complete with measure & tamping rod. The hammer is provided with a locking arrangement.
-
Beam Mould 100X100X500 mm₹2,550.00
Offered Beam mould which is used for concrete testing procedures. Available with different sizes.
-
Beam Mould 150X150X700 mm₹3,600.00
Beam Mould available in Cast iron & sizes are 150x150x700mm & 100x100x500mm. Beam mould is used for testing purpose in construction industry.
-
CTM – 1000 KN, Hand Operated₹34,000.00
Compression Testing Machine Specification : Compression Testing Equipment Manually (Hand) Operated fitted with single load gauge. The loads are measured on Bourdon tube type load gauges which are calibrated against certified proving rings. The load gauges are fitted with a maximum load pointer. Model SL-CC-006 SL-CC-007 Capacity (in KN) 1000 KN 1000 KN Pressure Gauge (In KN) 1000 KN 1000 KN Least Count (In KN) 5 KN 5 KN Pressure Gauge Diameter (mm) 150 200 Vertical Daylight (mm) 310 Adj 310 Horizontal Clearance(mm) 260 240 Platen Size (mm) 240 x 165 220 Ram Diameter (mm) 165 165 Ram Travel (mm) 50 50 Specimen Size (Can be Tested) Cube 100mm x 150mm 100mm x 150mm Cylindrical 100mm x 200mm 150mm x 300mm 100mm x 200mm 150mm x 300mm Brick 100 x 100 x225 mm
Note:-
- GST & Transportation will be charged extra.
- Packing Charges Extra
- No warranty
- Ex- Mumbai
-
CTM – 3000 KN, Digital Opp₹192,000.00
As per IS ( 14858 ) 3000 KN. Cube Testing Machine (300 Ton) 232 Computer attachable with Software data with Computer set
Cube Testing Machine that is highly acclaimed for its proficiency. The prime use of this testing machine can be seen at the construction site where it is used to test the strength of the concrete. The structure of the machine is as compact as making it easy to use on immobile laboratories or mobile testing laboratories which frequently change site or location. It is particularly useful where constant and consistent electric power is not available.
-
CTM Digital Operated – 2000KN₹99,000.00
Compression Testing Machine
Capacity: 200 Ton (2000 Kn)
Capacity: 100 Ton (1000 Kn)
Model: Digital
Type: Channel Based
Loading Unit: – The hydraulic jack of is fixed to the
base. The upper platen has got a self-aligning action
and is attached to a screw, which passes thru the cross-
head plate, and can be raised or lowered for initial
clearance adjustment. The lower platen rests on the
jackram and is positioned with the help of a centering
pin. Loading is accomplished by the upward movement
of the lower platen.
Pumping Unit :- The motorized pumping unit, which
is housed in an elegant console is of double plunger
type and is driven by a single phase 220/440 Volts 50
cycles electric motor. The pumping unit is a separate
unit connected to the jack by means of a Rubber Hose
Pipe. A junction box is suitable fixed to connect the
motor to the mains thru a push button starter.Additional Information
Delivery Time 08-10 Days Packaging Details Extra As Actual -
Cube Mould – Non ISI 10x10x10cm₹675.00
Cube mould available in varoius sizes like 150x150x150 mm, 100x100x100 mm, 70.6×70.6×70.6 mm & 50x50x50 mm.
-
Cube Mould- Non ISI 150 X150 X 150mm₹725.00
Leading Supplier & manufacturer of Cube Mould. Which are made up of high quality of raw material.
-
Cube Mould- Non ISI 7.06 x 7.06 x 7.06 cm₹475.00
Cube Mould is available in market as per ISI standard & Non ISI standard. Which is easily find out check strength of concrete.
-
Cylindrical Mould 150 X 300 mm₹1,950.00
Concrete cylinder molds are used to create cylinder test specimens. The cylinder molds are constructed of plastic or steel. The plastic concrete cylinder molds are disposable, while the steel molds are reusable. The molds come in a variety of sizes including: 2″ x 4″, 3″ x 6″, 4″ x 8″, and 6″ x 12″.
-
Density Basket₹950.00
For Density Tests on Aggregates as per Procedure Laid Down. Made of Brass / GI with Stainless steel Wire Mesh Ruggedly Constructed. Complete with Handle.
-
Flakiness Index Guage₹370.00
Used to determine the flakiness index of the aggregate. The aggregate particles are to be considered flaky, if their thickness is less than 0.6 of their nominal size. It consists of a frame with sliding panel with accurate slots of different standard width and length, the complete assembly is chrome plated or powder coated.
-
Flow table – Cement concrete Motorised₹17,500.00
Flow table for cement concrete which is used for concrete purpose. Used to determine the consistency of mortars and building lime.
-
Gubbi ISI Cube Mould – 15x15x15cm₹1,700.00
One of the leading manufacturer of ISI Cube Mould (150x 150x 150mm). Which is used for perfect strength of concrete. As per IS: 10086.
-
ISI Cube Mould -7.06×7.06×7.06cm₹1,500.00
Cube Mould is widely used in construction industry for the purpose of to achieve strength of concrete.
-
Slump Cone Test Apparatus₹1,200.00
Slump cone apparatus is used to determining the consistency of freshly mixed concrete. Which is available @ very low price.
-
Thickness Gauge₹350.00
Quality Standard : As Per IS 2386 (P-I)
Aggregates which are flaky and/or elongated will often lower the workability of a concrete mix and may also affect long term durability. In bituminous mixtures, flaky aggregates make for a harsh mix and may also crack and break up during compacting by rolling. The flakiness of aggregate is determined by measuring the thickness of individual particles. Hence we offer thickness gauge and length gauge to check flakiness and elongation index of the aggregate respectively.
-
Vibrating Table – 20 x 20 Inch
₹15,000.00Original price was: ₹15,000.00.₹14,950.00Current price is: ₹14,950.00.Vibrating Table – 20 x 20 Inch₹15,000.00Original price was: ₹15,000.00.₹14,950.00Current price is: ₹14,950.00.Vibrating table suitable for site and laboratory use. Vibrating tables for standardised compaction of fresh concrete in cubes.
-
Vibrating Table – 24 x 24 inch
₹17,000.00Original price was: ₹17,000.00.₹16,675.00Current price is: ₹16,675.00.Vibrating Table – 24 x 24 inch₹17,000.00Original price was: ₹17,000.00.₹16,675.00Current price is: ₹16,675.00.The Vibrating Table is used for compacting concrete cubes and cylinders. Available size are 24×24 inch & 20×20 inch.
-
Vicat Needle Apparatus₹1,600.00
Vicat Needle Apparatus IS Code:5513
We put forth to our esteemed clients an unmatched quality vicat needle apparatus. Vicat needle apparatus manufactured by us is widely used for determining the normal consistency and setting times of cement and ”a” class limes. We provide this product at economical cost. Standards