-
Cylindrical Mould 150 X 300 mm₹1,950.00
Concrete cylinder molds are used to create cylinder test specimens. The cylinder molds are constructed of plastic or steel. The plastic concrete cylinder molds are disposable, while the steel molds are reusable. The molds come in a variety of sizes including: 2″ x 4″, 3″ x 6″, 4″ x 8″, and 6″ x 12″.
-
Density Basket₹950.00
For Density Tests on Aggregates as per Procedure Laid Down. Made of Brass / GI with Stainless steel Wire Mesh Ruggedly Constructed. Complete with Handle.
-
Flakiness Index Guage₹370.00
Used to determine the flakiness index of the aggregate. The aggregate particles are to be considered flaky, if their thickness is less than 0.6 of their nominal size. It consists of a frame with sliding panel with accurate slots of different standard width and length, the complete assembly is chrome plated or powder coated.
-
Flow table – Cement concrete Motorised₹17,500.00
Flow table for cement concrete which is used for concrete purpose. Used to determine the consistency of mortars and building lime.
-
Gubbi ISI Cube Mould – 15x15x15cm₹1,700.00
One of the leading manufacturer of ISI Cube Mould (150x 150x 150mm). Which is used for perfect strength of concrete. As per IS: 10086.
-
ISI COMMPRESSION TESTING MACHINE 2000kN (Touch Sreen with Printer) Model II₹155,000.00
Features:
- Compression testing machine is robust.
- Loading Accuracy ± 1%
- Simplified design for ease of operation and maintenance.
- Highly rigid frame.
- Highly stability.
- Safety provisions against over load.
- Loads are calibrated in kN against certified proving rings.
- Operator safety features like glass window are provided.
- Self aligning platen with fast accessory change capability.
- Peak Load recording.
- Vickers hardness
- Maximum diameter of Bottom Bearing Blocks dia 278mm.
- Movable portion tilt 5.14 degrees.
Installation And Commission Procedure:- The concrete platform of is prepared with concrete having mixing ratio cement: sand: aggregate with water cement ratio and the fixing arrangements shall be done for compression testing machine such as bolting or welding rods are placed in concrete Then curing is done for 28 days.
Preparation Of Platform:
- Placing of compression testing machine on concrete platform and fixing is done.–Initial setup is carried out such as cleanin connection and calibration
- Power to plug in Calibration to conduct.
- CTM ready for testing.
-
ISI Compression Testing Machine₹140,000.00
Usage/Application Concrete Testing Display Type Digital Capacity 2000 KN Brand Gubbi Industries Material Mild Steel Phase Single Phase Frequency 50 Hz Voltage 240 V Weight 20 kg Country of Origin Made in India Features:
- Compression testing machine is robust.
- Loading Accuracy ± 1%
- Simplified design for ease of operation and maintenance.
- Highly rigid frame.
- Highly stability.
- Safety provisions against over load.
- Loads are calibrated in kN against certified proving rings.
- Operator safety features like glass window are provided.
- Self aligning platen with fast accessory change capability.
- Peak Load recording.
- Vickers hardness
- Maximum diameter of Bottom Bearing Blocks dia 278mm.
- Movable portion tilt 5.14 degrees.
Installation And Commission Procedure:- The concrete platform of is prepared with concrete having mixing ratio cement: sand: aggregate with water cement ratio and the fixing arrangements shall be done for compression testing machine such as bolting or welding rods are placed in concrete Then curing is done for 28 days.
Preparation Of Platform:
- Placing of compression testing machine on concrete platform and fixing is done.–Initial setup is carried out such as cleanin connection and calibration
- Power to plug in Calibration to conduct.
- CTM ready for testing.
-
ISI Cube Mould -7.06×7.06×7.06cm₹1,500.00
Cube Mould is widely used in construction industry for the purpose of to achieve strength of concrete.
-
-