Jolting Apparatus|Jolting Apparatus for Testing Cement| www.constructionetail.com

According to IS 1727
This apparatus consists of a rectangular table rigidly connected by two support arms to a spindle at a horizontal distance of 800 mm from the centre of the table
There is a projecting lug with a plane face on the upper face of the table beneath which is a stop with a rounded upper surface
The table can be raised and allowed to fall freely on the stop by a cam which is connected to a motor and gearbox through a V belt an pulleys
The cam rotates at a rate of 60 Rev Min.
A stroke counter fitted with micro switch is provided which stops the machine after 60 Jolts
Locating pins are provided for mounting the mould compartments on the table
The mould surmounted by the hopper can be clamped rigidly to the table
Supplied complete with mould and hopper
Suitable for operation on 230 Volts Single Phase A.C. Supply
A Digital preset counter can be supplied at an extra cost
Steel mould with base plate having three compartments each having 40mm x 40mm x 160mm internal dimensions
Apparatus for de moulding the specimen

Jolting Apparatus - 40 x 40 x 160mm