₹355.00
Concrete anode are the anodes used in concrete to prevent further corrosion. Anodes are surrounded by Alkali activated mortars once installed or fastened to the reinforcement steel zinc core corrodes & protects the reinforcement steel.
1000 in stock
Quality
Assurance
Trusted
Delivery
After Sales
Assistance
Buyer
Protection
Applied 100g anodes in a localised repair on a chajja. The steel was slightly rusted but still intact. Installation was quick, and it integrated well with the repair mortar. Useful for controlling micro corrosion zones.
Chemical Base: Acrylic copolymer with Special Additives
Density: 1.35 kg/ltr (at +27°C)
Solid Content: 45%
Crack Bridging Ability: > 1.5 mm
Bond Strength: 2 mpa
Tensile Stength: 3.5 mpa
Elongatoin: >100%
Total System Thickness (DFT): 110-115 microns (primer with two coats)
Note:-
GST 18% & Transportation will be charged extra.
Packing Charges Extra.
Ex- Mumbai
Nature: Acrylic co-polymer with special additives
Primer: Clean potable water in 1:1 ratio (1 part RAIN GUARD : 1 part water)
Drying Time: Dry to touch – 30 minutes
Solid Content: 62%
Specific Gravity: 1.2
Recoating Period: Minimum 6-8 hrs. at room temperature (ideally 24 hrs.)
Elongation: 300-400%
Note:-
GST 18% & Transportation will be charged extra.
Packing Charges Extra.
Ex- Mumbai
Corro guard -B are the anodes used in concrete to prevent further corrosion. Anodes are surrounded by Alkali activated mortars once installed or fastened to the reinforcement steel zinc core corrodes & protects the reinforcement steel.
Uses:-
Corro guard -B are the anodes used in concrete to prevent further corrosion. Anodes are surrounded by Alkali activated mortars once installed or fastened to the reinforcement steel zinc core corrodes & protects the reinforcement steel.
Uses:-
Select at least 2 products
to compare
Gautam Shetty –
Applied 100g anodes in a localised repair on a chajja. The steel was slightly rusted but still intact. Installation was quick, and it integrated well with the repair mortar. Useful for controlling micro corrosion zones.